Before deep diving into the wonderful world of EasyBuild and getting your hands dirty with the hands on exercises coming up in this tutorial, you will need to install EasyBuild.
In this section we outline a couple of different ways of doing this, and also the things you should pay attention to. By the end, you will have a functional EasyBuild installation that you can use for the remainder of this tutorial.
The main target platform for EasyBuild is Linux, since it is heavily focused on installing software on HPC system where Linux is dominant operating system (to the point where 100% of the current Top500 list of supercomputers are running Linux).
EasyBuild is also compatible with macOS, but the included easyconfig files are heavily focused on Linux so most software installations supported by EasyBuild won't work out-of-the-box on macOS. You can still use the EasyBuild command line interface on macOS for other tasks though, like development or contributing back to the project.
EasyBuild is implemented in Python, and is compatible with both Python 2.7 and Python 3.5+ (that is, Python 3.5 or a newer version of Python 3).
To check which Python version you have, use:
No additional Python packages are required by EasyBuild, the ones that come with the standard Python distribution are sufficient. Some additional Python packages can be leveraged for specific features. More on that later.
Environment modules tool¶
An environment modules tool is required for using EasyBuild.
We strongly recommend using Lmod, a Lua-based modern environment modules implementation and the most commonly used modules tool in the EasyBuild community. Other implementations, like the original Tcl-based one, are also supported.
To check if you have a modules tool installed, use:
If this produces output that starts with something like "
Modules based on Lua: Version 8.2.5" you have Lmod installed,
which is the default modules tool used by EasyBuild, and you are all set for installing and using EasyBuild.
Any sufficiently recent Lmod version (8.x or even 7.x) should be fine.
If you see output that starts with a line like "
VERSION=3.2.10" or "
Modules Release 4.5.0",
you have the original Tcl-based environment modules tool installed
and EasyBuild will need to be configured to use it after installation.
module function is not defined either you do not have a modules tool installed
or your environment is not properly set up to use it. In this case,
please refer to the EasyBuild documentation here for more information.
EasyBuild as a Python package¶
EasyBuild consists of a number of interdependent Python packages, and is available via both GitHub at https://github.com/easybuilders, as well as via the standard Python Package Index (PyPI) at https://pypi.org/project/easybuild.
As you may be aware the Python packaging ecosystem is bit convoluted, which is reflected in the many different ways in which you can install a Python package. In addition, EasyBuild is packaged in 3 components (framework, easyblocks, easyconfigs) which slightly complicates the installation.
Nevertheless, you don't need to be a rocket scientist to install EasyBuild (and even if you are, that's OK too), so don't worry.
You can install EasyBuild just like you can install any other Python software that is released
via the standard Python Package Index (PyPI), through one of the standard Python installation tools
And since EasyBuild is a software installation tool in its own right, we actually have a couple
of additional tricks up our sleeve!
Python 2 or Python 3?¶
For EasyBuild it does not matter whether you install it on top of Python 2 or Python 3. The functionality provided is identical. However, since Python 2 is end-of-life, we strongly recommend using Python 3 if you have the choice.
By default EasyBuild will use the
python command to run,
but you can control this if needed via
We present three methods for installing EasyBuild. It is up to you which one you prefer, both result a fully functional EasyBuild installation.
Time to get your hands dirty!
Method 1: Using
Since EasyBuild is released as a Python package on PyPI
you can install it using
pip, the most commonly used tool for installing Python packages.
You may need to take additional steps after the installation, depending on the exact installation command.
There are various other ways of installing Python packages, which we won't cover here.
If you are familiar with other tools like
pipenv, feel free to use those
instead to install EasyBuild.
Installing EasyBuild with
pip is as simple as running the following command:
pip install easybuild
However, you may need to slightly change this command depending on the context and your personal preferences:
To install EasyBuild system-wide, you can use
sudo(if you have admin privileges):
sudo pip install easybuild
To install EasyBuild in your personal home directory, you can use the
--useroption:This will result in an EasyBuild installation in
pip install --user easybuild
To install EasyBuild in a specific directory you can use the
--prefixoption:In this command, you should replace '
pip install --prefix _PREFIX_ easybuild
_PREFIX_' with the location where you want to have EasyBuild installed (for example,
On systems where both Python 2 and Python 3 are installed you may also have different
available. Or maybe
pip is not available at all, and only "versioned"
pip commands like
If you (only) have
pip3 available, you can replace
pip3 in any of the
pip install commands
If you want to ensure that you are using the
pip installation that corresponds to the Python 3 installation
that you intend to use, you can use
python3 -m pip rather than
Updating your environment¶
If you used the
--prefix option in the
pip install command,
or if you installed EasyBuild with a
pip version that does not correspond
to your default Python installation,
you will need to update your environment to make EasyBuild ready for use.
This is not required if you did a system-wide installation in a standard location with the default Python version.
Keep in mind that you will have to make these environment changes again if you start a new shell session.
To avoid this, you can update the
.bashrc shell startup script in your home directory.
$PATH environment variable to make sure the
eb command is available:
_PREFIX_' in this command with the directory path where EasyBuild was installed into (use
$HOME/.localif you used
pip install --user).
This is not required if you installed EasyBuild in a standard system location.
You can check with the "
which eb" command to determine whether or not you need to update the
$PATH environment variable.
If you installed EasyBuild to a non-standard location using
pip install --prefix,
you also need to update the Python search path environment variable
$PYTHONPATH to instruct Python where
it can find the EasyBuild Python packages.
This is not required if you used the
--user option, since Python will automatically consider
$HOME/.local when searching for installed Python packages, or if you installed EasyBuild in a standard
$PYTHONPATH by running a command like:
Here, you need to replace the
Y with the major and minor version of your Python installation,
which you can determine by running
For example, if you are using Python 3.6, make sure you are using
/python3.6/ in the command to update
And of course, you again need to replace '
_PREFIX_' with the installation prefix where EasyBuild was installed
# update $PYTHONPATH if EasyBuild was installed in $HOME/tools with Python 3.6 export PYTHONPATH=$HOME/tools/lib/python3.6/site-packages:$PYTHONPATH
If you want to control which Python version is used to run EasyBuild,
you can specify the name or the full path to the
python command that should be used by the
$EB_PYTHON environment variable.
This may be required when you installing EasyBuild with a version of
pip that does not correspond
with the default Python version.
For example, to ensure that the
eb command uses
To determine which
python commands are being considered by the
you can define the
$EB_VERBOSE environment variable. For example:
$ EB_VERBOSE=1 eb --version >> Considering 'python3.6'... >> 'python3' version: 3.6.8, which matches Python 3 version requirement (>= 3.5) >> Selected Python command: python3 (/usr/bin/python3.6) >> python3.6 -m easybuild.main --version This is EasyBuild 4.3.3 (framework: 4.3.3, easyblocks: 4.3.3) on host example
Method 2: Installing EasyBuild with EasyBuild¶
This section covers an alternative method for installing EasyBuild.
If you already have EasyBuild installed through
you can skip ahead to the next section.
If you prefer having EasyBuild available through an environment module file, you can consider installing EasyBuild with EasyBuild. This can be done in 3 steps:
- Step 1: Installing EasyBuild with
pipinto a temporary location (only needed if EasyBuild is not installed yet)
- Step 2: Using EasyBuild to install EasyBuild as a module
- Step 3: Loading the EasyBuild module
Step 1: Installing EasyBuild into a temporary location¶
If you don't have EasyBuild installed yet, you need to install it in a temporary location first.
The recommended way of doing this is using
For example, to install EasyBuild into a subdirectory
/tmp/$USER using the default Python 3 version:
# pick installation prefix, and install EasyBuild into it export EB_TMPDIR=/tmp/$USER/eb_tmp python3 -m pip install --ignore-installed --prefix $EB_TMPDIR easybuild
# update environment to use this temporary EasyBuild installation export PATH=$EB_TMPDIR/bin:$PATH export PYTHONPATH=$(/bin/ls -rtd -1 $EB_TMPDIR/lib*/python*/site-packages | tail -1):$PYTHONPATH export EB_PYTHON=python3
Step 2: Using EasyBuild to install EasyBuild¶
Once you have a working (recent) temporary EasyBuild installation, you can use it to install EasyBuild as a module. Usually this is done in the location where you would like to install other software too.
You can use the
eb --install-latest-eb-release command for this,
combined with the
--prefix option to control which directories are used by EasyBuild for the installation.
For example, to install the latest version of EasyBuild as a module into
eb --install-latest-eb-release --prefix $HOME/easybuild
You may see a harmless deprecation warning popping up when performing this installation, just ignore it.
Step 3: Loading the EasyBuild module¶
Once step 2 is completed, you should be able to load the module that was generated alongside the EasyBuild installation. You will need to do this every time you start a new shell session.
First, make the module available by running the following command (which will update the module search path
module use _PREFIX_/modules/all
_PREFIX_' with the path to the directory that you used when running step 2
Then, load the
EasyBuild module to update your environment and make EasyBuild available for use:
module load EasyBuild
Note that in this case, we don't need to make any changes to our environment for EasyBuild to work correctly. The environment module file that was generated by EasyBuild specifies all changes that need to be made.
Method 3: Development setup¶
If you are planning to make changes to EasyBuild, or if you prefer using the latest bleeding edge version of EasyBuild that is being developed, you can consider cloning the 3 main EasyBuild repositories from GitHub, and updating your environment to run EasyBuild from there.
This can be done as follows (into
mkdir -p $HOME/easybuild cd $HOME/easybuild
# clone EasyBuild repositories from GitHub git clone https://github.com/easybuilders/easybuild-framework.git git clone https://github.com/easybuilders/easybuild-easyblocks.git git clone https://github.com/easybuilders/easybuild-easyconfigs.git
# update environment for running EasyBuild from there export PATH=$HOME/easybuild/easybuild-framework:$PATH export PYTHONPATH=$HOME/easybuild/easybuild-framework:$HOME/easybuild/easybuild-easyblocks:$HOME/easybuild/easybuild-easyconfigs:$PYTHONPATH # control which Python command is used to run EasyBuild export EB_PYTHON=python3
Verifying the installation¶
Regardless of how EasyBuild was installed, you can now run a couple of basic commands to verify the installation:
Checking the version¶
To check which EasyBuild version you have installed, run:
The output should match with the latest EasyBuild version.
Consulting the help output¶
You can consult the help output of the
eb command, which produces a long list of available options
along with a short informative message.
Showing the default EasyBuild configuration¶
To inspect the current EasyBuild configuration, you can use this command:
This should tell you that EasyBuild (ab)uses
$HOME/.local/easybuild as a default location.
More on configuring EasyBuild in the next part of the tutorial.
You ask EasyBuild to collect and print some information about the system you are using it on (OS, CPU, Python, etc.) using this command:
Before we wrap up here, a brief word about updating EasyBuild.
Once you have EasyBuild installed, the easiest way to update to a newer version is by instructing EasyBuild to install the latest available version as a module:
This will result in a new EasyBuild installation, which is entirely separate from the EasyBuild installation you are currently using (so it is not an in-place update). The location where this new EasyBuild version will be installed is determined by the active EasyBuild configuration.
If you have installed EasyBuild through
pip, and you prefer updating that installation,
you can use
pip install --upgrade easybuild (perhaps with additional options like
Install EasyBuild in your home directory.
Make sure that the EasyBuild installation uses the
python3 command to run,
rather than the standard
Choose your own adventure, or try all these installation methods!
- install EasyBuild with
pip(or another very similar command...) using either the
- perform a (manual) "bootstrap" installation into
$HOME/easybuild, as outlined in installation method 2;
- set up a development installation;
Check that the installation works by running the verification commands outlined above.
Make sure you have a working EasyBuild installation before proceeding with the rest of the tutorial!