Installing software with EasyBuild¶
You should now be able to make an informed decision on which easyconfig file you should use to make EasyBuild install the software you require.
As mentioned before, installing an easyconfig is as simple as passing it to the
So, let's try to install SAMtools version 1.14:
$ eb SAMtools-1.14-GCC-11.2.0.eb == Temporary log file in case of crash /tmp/eb-os2fd8gv/easybuild-yda39z4b.log == processing EasyBuild easyconfig /home/achilles/easybuild/easybuild-easyconfigs/easybuild/easyconfigs/s/SAMtools/SAMtools-1.14-GCC-11.2.0.eb == building and installing SAMtools/1.14-GCC-11.2.0... == fetching files... == creating build dir, resetting environment... == unpacking... == ... (took 1 secs) == patching... == preparing... == ... (took 3 secs) == configuring... == ... (took 6 secs) == building... == ... (took 46 secs) == testing... == installing... == taking care of extensions... == restore after iterating... == postprocessing... == sanity checking... == ... (took 1 secs) == cleaning up... == creating module... == ... (took 1 secs) == permissions... == packaging... == COMPLETED: Installation ended successfully (took 1 min 0 secs) == Results of the build can be found in the log file(s) /project/def-maintainers/achilles/Rocky8/zen2/software/SAMtools/1.14-GCC-11.2.0/easybuild/easybuild-SAMtools-1.14-20220502.121241.log == Build succeeded for 1 out of 1 == Temporary log file(s) /tmp/eb-os2fd8gv/easybuild-yda39z4b.log* have been removed. == Temporary directory /tmp/eb-os2fd8gv has been removed.
That was... easy. Is that really all there is to it? Well, almost...
Enabling dependency resolution¶
The SAMtools installation worked like a charm, but remember that all required dependencies were already available (see the section on checking dependencies).
If we try this with the
BCFtools-1.14-GCC-11.2.0.eb, for which the required
HTSlib dependencies are not available yet, it's less successful:
$ eb BCFtools-1.14-GCC-11.2.0.eb -M 3 out of 23 required modules missing: * GSL/2.7-GCC-11.2.0 (GSL-2.7-GCC-11.2.0.eb) * HTSlib/1.14-GCC-11.2.0 (HTSlib-1.14-GCC-11.2.0.eb) * BCFtools/1.14-GCC-11.4.0 (BCFtools-1.14-GCC-11.2.0.eb)
$ eb BCFtools-1.14-GCC-11.2.0.eb ... == preparing... == FAILED: Installation ended unsuccessfully (build directory: /tmp/example/build/BCFtools/1.14/GCC-11.2.0): build failed (first 300 chars): Missing modules for dependencies (use --robot?): HTSlib/1.14-GCC-11.2.0, GSL/2.7-GCC-11.2.0 (took 1 secs) == Results of the build can be found in the log file(s) /tmp/eb-66a5glv6/easybuild-BCFtools-1.14-20220502.145732.ElHDN.log ERROR: Build of /easybuild/software/EasyBuild/20220501-dev/easybuild/easyconfigs/b/BCFtools/BCFtools-1.14-GCC-11.2.0.eb failed (err: 'build failed (first 300 chars): Missing modules for dependencies (use --robot?): HTSlib/1.14-GCC-11.2.0, GSL/2.7-GCC-11.2.0')
Oh my, what's this all about?
If we filter the output a bit and focus on the actual error, the problem is clear:
Missing modules for dependencies (use --robot?): HTSlib/1.14-GCC-11.2.0, GSL/2.7-GCC-11.2.0
The required dependencies
GSL/2.7-GCC-11.2.0 are not installed yet,
and EasyBuild does not automatically install missing dependencies unless it is told to do so.
It helpfully suggests to use the
--robot command line option, so let's try that:
$ eb BCFtools-1.14-GCC-11.2.0.eb --robot ... == resolving dependencies ... ... == building and installing HTSlib/1.14-GCC-11.2.0... ... == COMPLETED: Installation ended successfully (took 14 sec) ... == building and installing GSL/2.7-GCC-11.2.0... ... == COMPLETED: Installation ended successfully (took 1 min 10 sec) ... == building and installing BCFtools/1.14-GCC-11.2.0... ... == COMPLETED: Installation ended successfully (took 8 sec) ... == Build succeeded for 3 out of 3
With dependency resolution enabled the
GSL modules get installed first,
before EasyBuild proceeds with installing
As you may have noticed if you tried the previous example hands-on, some installations take a while. An installation can be spending quite a bit of time during the build step, but what is actually going on there?
To provide some more feedback as the installation progresses, you can enable the "
trace" configuration setting.
Let's do this by defining the
$EASYBUILD_TRACE environment variable, just to avoid having to type
over and over again.
We will redo the installation of
BCFtools-1.14-GCC-11.2.0.eb by passing the
option to the
eb command (try yourself what happens if you don't use the
$ export EASYBUILD_TRACE=1 $ eb BCFtools-1.14-GCC-11.2.0.eb --rebuild ... == configuring... >> running command: [started at: 2022-05-02 15:05:42] [working dir: /tmp/example/build/BCFtools/1.14/GCC-11.2.0/bcftools-1.14] [output logged in /tmp/eb-tus8o1g4/easybuild-run_cmd-mjc8gj6x.log] /home/easybuild/.local/easybuild/sources/generic/eb_v4.5.5.dev0/ConfigureMake/config.guess >> command completed: exit 0, ran in < 1s >> running command: [started at: 2022-05-02 15:05:42] [working dir: /tmp/example/build/BCFtools/1.14/GCC-11.2.0/bcftools-1.14] [output logged in /tmp/eb-tus8o1g4/easybuild-run_cmd-cv6vncds.log] ./configure --prefix=/home/example/easybuild/software/BCFtools/1.14-GCC-11.2.0 --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --with-htslib=$EBROOTHTSLIB --enable-libgsl >> command completed: exit 0, ran in 00h00m01s == ... (took 1 secs) == building... >> running command: [started at: 2022-05-02 15:05:43] [working dir: /tmp/example/build/BCFtools/1.14/GCC-11.2.0/bcftools-1.14] [output logged in /tmp/eb-tus8o1g4/easybuild-run_cmd-wtsxpxf2.log] make -j 8 >> command completed: exit 0, ran in 00h00m03s
That's a bit more comforting to stare at...
During the configure step, the
./configure command is run with option to
enable support for leveraging
During the build step, the software is actually being compiled
by running the
make command. EasyBuild automatically uses the available cores on the system (in this case 8).
We even get a pointer to a log file that contains the output of the command being run,
so we can use
tail -f to see in detail how it progresses.
make command completes, we get a message that the command completed with a exit code 0
(implying success), and that it took 3 seconds to run. That's good to know.
Later during the installation, we now also see this output during the sanity check step:
== sanity checking... >> file 'bin/bcftools' found: OK >> file 'bin/plot-vcfstats' found: OK >> file 'bin/vcfutils.pl' found: OK >> (non-empty) directory 'libexec/bcftools' found: OK
Thanks to enabling trace mode, EasyBuild tells us which files & directories it is checking for in the installation, before declaring it a success. Nice!
The extra output you get when trace mode is enabled is concise and hence not overwhelming, while it gives a better insight into what is going on during the installation. It may also help to spot unexpected actions being taken during the installation early on, so you can interrupt the installation before it completes, if deemed necessary.
Using installed software¶
So far, we have already installed 4 different software packages (SAMtools, HTSlib, GSL, and BCFtools); we even installed BCFtools twice!
A lot was going on underneath the covers: locating and unpacking the source tarballs, setting up the build environment, configuring the build, compiling, creating and populating the installation directory, performing a quick sanity check on the installation, cleaning things up, and finally generated the environment module file corresponding to the installation.
That's great, but how do we now actually use these installations?
This is where the generated module files come into play: they form the access portal to the software
installations, and we'll use the ubiquitous
module command to digest them.
First, we need to make sure that the modules tool is aware of where the module files for
our installations are located. If you're unsure where EasyBuild is installing stuff at this point,
check the output of
eb --show-config; the value of the
installpath configuration setting is what we are interested in now:
$ eb --show-config ... installpath (E) = /home/example/easybuild ... repositorypath (E) = /home/example/easybuild/ebfiles_repo ... sourcepath (E) = /home/example/easybuild/sources ...
So, what's in this directory?
$ ls -l $HOME/easybuild total 16 drwxrwxr-x 5 example example 4096 Jun 10 20:11 ebfiles_repo drwxrwxr-x 5 example example 4096 Jun 10 20:10 modules drwxrwxr-x 6 example example 4096 Jun 10 20:10 software drwxrwxr-x 6 example example 4096 Jun 10 20:10 sources
sources directories correspond to the
settings, respectively. The
software directories are what we need now.
modules subdirectory consists of multiple subdirectories:
$ ls $HOME/easybuild/modules all bio devel numlib tools
numlib correspond to different software categories,
and contain symbolic links to the module files in the
which contains all actual module files for software installed in this EasyBuild installation path.
We'll ignore these separate category directories for now.
Let's inform the modules tool about the existence of these module files using
module use $HOME/easybuild/modules/all
This command does little more that updating the
$MODULEPATH environment variable,
which contains a list of paths that the modules tool should consider when looking for module files.
Now the modules tool should be aware of our brand new installations:
$ module avail ---------------------- /home/example/easybuild/modules/all ----------------------- BCFtools/1.14-GCC-11.2.0 GSL/2.7-GCC-11.2.0 SAMtools/1.14-GCC-11.2.0 EasyBuild/4.5.4 HTSlib/1.14-GCC-11.2.0 bzip2/1.0.8 ---------------------------- /easybuild/modules/all ----------------------------- ...
This output shows both the modules for our own installations as well as the "central" installations in
/easybuild (which we omitted above for brevity).
Now we can load these modules and start using these software installations.
Let's test this for BCFtools. In our current environment, the
bcftools command is not available yet:
$ module list No modules loaded $ bcftools -bash: bcftools: command not found
Loading the module for BCFtools changes that:
$ module load BCFtools/1.14-GCC-11.2.0 $ module list Currently Loaded Modules: 1) EasyBuild/4.5.4 7) XZ/5.2.5-GCCcore-11.2.0 2) GCCcore/11.2.0 8) OpenSSL/1.1 3) zlib/1.2.11-GCCcore-11.2.0 9) cURL/7.78.0-GCCcore-11.2.0 4) binutils/2.37-GCCcore-11.2.0 10) HTSlib/1.14-GCC-11.2.0 5) GCC/11.2.0 11) GSL/2.7-GCC-11.2.0 6) bzip2/1.0.8-GCCcore-11.2.0 12) BCFtools/1.14-GCC-11.2.0 $ bcftools --version bcftools 1.14 Using htslib 1.14 ...
Note that the modules for the required dependencies, including the compiler toolchain (which provides runtime libraries
libstdc++.so), are loaded automatically. The "
module load" command changes the active environment,
by updating environment variables like
$PATH for example, to make the software available for use.
Resetting your environment¶
To restore your environment to a pristine state in which no modules are loaded, you can either
unload the loaded modules one by one using "
module unload", or you can unload all of them at once using
If you are using an EasyBuild installation provided by a module,
don't forget to load the
EasyBuild module again after running "
Maybe you have overlooked how the software we are playing around with was not only installed across multiple
different installation directories per software, we are also "stacking" our own installations (in
on top of installations that are provided in a totally different location (
EasyBuild doesn't care where software is installed: as long as the module file that provides access to it is available, it is happy to pick it up and use it when required.
This implies that end users of an HPC system can easily install their own small software stack on top of what is provided centrally by the HPC support team, for example. They can even "replace" a central software installation for their purposes if they need to, since the modules tool will load the first module file that matches the request being made (there are some caveats with this, but we won't go into those here).
Do yourself a favor: don't peek at the solution until you have made an attempt to solve the exercise yourself!
Please do not spoil solutions for others before they have been discussed by the tutorial organisers.
The exercises are based on the easyconfig files included with EasyBuild 4.5.4.
Exercise S.1 - Installing software
Install version 3.6.0 of the
h5py Python package and all missing dependencies,
foss/2021b toolchain, into
while leveraging the already installed software available from
Enable trace output so you can see which parts of the installation take a while.
(click to show solution)
First, determine the easyconfig file we can use for this:
$ eb -S 'h5py-3.6.0.*foss-2021b' CFGS1=/home/easybuilder/easybuild/software/EasyBuild/4.5.4/easybuild/easyconfigs/h/h5py * $CFGS1/h5py-3.6.0-foss-2021b.eb
Make sure the pre-installed software in
/easybuild/ is available:
module use /easybuild/modules/all
Check which dependencies are missing to install this
$ eb h5py-3.6.0-foss-2021b.eb --missing 2 out of 63 required modules missing: * pkgconfig/1.5.5-GCCcore-11.2.0-python (pkgconfig-1.5.5-GCCcore-11.2.0-python.eb) * h5py/3.6.0-foss-2021b (h5py-3.6.0-foss-2021b.eb)
h5py by specifying the easyconfig file and enabling dependency resolution via
while indicating that we want to install the software into
/tmp/$USER/easybuild using the
option. Also make sure that trace mode is enabled by defining the
$EASYBUILD_TRACE environment variable.
$ export EASYBUILD_TRACE=1 $ eb h5py-3.6.0-foss-2021b.eb --robot --installpath /tmp/$USER/easybuild ... == building and installing pkgconfig/1.5.5-GCCcore-11.2.0-python... ... == building and installing h5py/3.6.0-foss-2021b... ... == installing... >> running command: [started at: 2022-05-02 13:38:37] [working dir: /tmp/example/h5py/3.6.0/foss-2021b/h5py-3.6.0] [output logged in /tmp/eb-rjjkbqe1/easybuild-run_cmd-d_dkc4iz.log] HDF5_MPI=ON HDF5_DIR="$EBROOTHDF5" H5PY_SETUP_REQUIRES=0 pip install --prefix=/tmp/achilles/easybuild/software/h5py/3.6.0-foss-2021b --no-deps --ignore-installed --no-index --no-build-isolation . >> command completed: exit 0, ran in 00h01m43s ... == COMPLETED: Installation ended successfully (took 2 min 0 sec) ... == Build succeeded for 2 out of 2
The trace output shows that most time is spent in the installing command,
Exercise S.2 - Using installed software
h5py installation from the previous exercise to create an empty HDF5 file,
using the following Python statements:
import h5py f = h5py.File("empty.hdf5", "w") f.close()
Check the resulting file using the
(click to show solution)
First, we need to make the modules tool aware of the module files that were installed into
module use /tmp/$USER/easybuild/modules/all
Then we can check the
h5py module is available, and load it:
$ module avail h5py ------------ /tmp/example/easybuild/modules/all ------------ h5py/3.6.0-foss-2021b
module load h5py/3.6.0-foss-2021b
The Python code snippet can be run directly on the command line using "
python -c '...'", since it's tiny:
python -c 'import h5py; f = h5py.File("empty.hdf5", "w"); f.close()'
test_h5py.py, and then run it with
Checking with the
h5stat command shows that the resulting
empty.hdf5 is indeed a valid HDF5 file:
$ ls -l empty.hdf5 -rw-rw-r-- 1 example example 800 Mai 2 15:48 empty.hdf5 $ h5stat empty.hdf5 Filename: empty.hdf5 File information # of unique groups: 1 # of unique datasets: 0 ...
If you've made it through the hands-on exercises, congratulations!
If not, don't worry too much about it. We covered a lot of ground here, and it's a lot to take in at once, take your time...
Feel free to ask questions in the
#tutorial-isc22 channel in the EasyBuild
we're happy to help!
next: Troubleshooting - (back to overview page)